This Robot Could Transform Manufacturing

A smarter, safer new industrial robot could bring automation to new areas of manual work and help many U.S. manufacturers regain a competitive edge.

5 comments

Get a grip: Baxter demonstrates a simple manufacturing task at Rethink Robotics’ headquarters in Boston.
Technology Review

About two months ago, a new employee arrived on the production line at Vanguard Plastics in Southington, Connecticut, a town that was once a hub of U.S. manufacturing but saw many of its factories disappear in the 1960s. The small manufacturer's new worker, Baxter, is six feet tall, 300 pounds, and a robot. For a hulking machine, Baxter is remarkably expressive. A pair of eyes on the screen that serves as a face stare down as the robot picks up plastic components, look concerned when it makes a mistake, and direct its glance at its next task when one is finished. It's cute. But the real point of these expressions is that they let workers nearby know instantly if Baxter is performing appropriately, and they provide clues to what it is about to do next. Even more amazing, when Baxter is done with one task, a fellow worker can simply show the robot how to start another. "Almost anyone, literally, can in very short order be shown how to program it," says Chris Budnick, president of Vanguard Plastics. "It's a matter of a couple of minutes."

Baxter is the first of a new generation of smarter, more adaptive industrial robots. Conventional industrial robots are expensive to program, incapable of handling even small deviations in their environment, and so dangerous that they have to be physically separated from human workers by cages. So even as robotics have become commonplace in the automotive and pharmaceutical industries, they remain impractical in many other types of manufacturing. Baxter, however, can be programmed more easily than a Tivo and can deftly respond to a toppled-over part or shifted table. And it is so safe that Baxter's developer, Rethink Robotics, which loaned Baxter to Vanguard Plastics, believes it can work seamlessly alongside its human coworkers.

Baxter's talents could, for the first time, bring the benefits of robotics and automation to areas of work where it never made sense before. This might mean lost jobs for an already struggling low-skill workforce. But it could also help the United States compete in the global manufacturing market against countries that offer low-wage labor. The amount of manufacturing in the United States has declined dramatically over the last few decades, in part because workers in other parts of the world will perform simple and menial jobs for far less. But robots like Baxter could wipe out that advantage by taking over such tasks, making it once again possible for many industries to competitively manufacture their products in the United States and other developed countries.

Advertisement

Perhaps it's unsurprising that such an innovation should come from probably the biggest name in the world of robots, Rodney Brooks. During the 1980s and 1990s, while at MIT, Brooks published work that helped shape the twin fields of robotics and artificial intelligence. Then, in 1990, together with two of his students from MIT, he cofounded iRobot, a company that introduced robots to new fields of work. It now makes a wide range of domestic and military robots, including the Roomba, a Frisbee-size household vacuum cleaner that has sold more than eight million worldwide.

The idea for Baxter came about, Brooks says, while iRobot was searching for a suitable manufacturing partner for its one of its products. He remembers marveling at the fact that so much electronics manufacturing was still done by hand and how much of this kind of manufacturing had moved to low-wage economies in Asia. "I thought, 'Are we going to be doing this in 500 years—still chasing cheap labor? There's got to be a different way,'" he says.

Brooks, who founded Rethink in 2008 after leaving both iRobot and MIT, realized that robots could take over many jobs if they could be made safe, adaptable, and ridiculously easy to program. "Everyone was thinking about how to do it with the current industrial robots," he says. "I said, 'Let's make a different sort of robot for industry.'"

Robot pioneer: Rodney Brooks, the CTO of Rethink Robotics, discusses his companies plans.
Technology Review

The result is something very different indeed. Much like a human worker, Baxter can be taught in minutes how to recognize a new object or perform a new task. To teach Baxter to recognize something, you just hold the object in front of one of its cameras, which are located in the head, in the chest, and at the end of each arm. To program an action, you can move one of Baxter's two giant arms through the desired motion and select from a number of preprogrammed actions using a pair of dial controls found in each forearm. When you grab one of Baxter's arms, it feels light as a feather. Its motors compensate in response to your touch, making the heavy limb easy to move through the air.

Sophisticated computer vision software means that even if a plastic widget has toppled over, Baxter will still recognize it. "The shipping and receiving folks have no trouble programming it," says Vanguard Plastics' Budnick. "We had it taking parts from one conveyor and putting them onto a table."

Vanguard Plastics already has 24 conventional robots. They can pick and place objects with fantastic accuracy and speed. But it takes up to a day to program one, and if anything is misaligned they will grab at thin air all day. These robots must also be separated from human workers by protective fencing.

Baxter requires no such barriers. Brooks likes to demonstrate his robot's safety features by putting his head in the way of one of its giant arms as it swings through a task, smiling as he receives nothing more than a gentle bump. Baxter moves too slowly and gently to do harm, and an array of sonar sensors positioned around its head can detect human movement. The robot also reacts to the sudden change in force that occurs with an unexpected impact and responds by stopping instantly.

The International Federation of Robotics estimates that there are now 1.1 million working robots around the world. About 80 percent of all the work involved in manufacturing a car is now done by machines. In some industries, however, the volume is too low to make automation worthwhile, or the product line changes too rapidly in response to new demand or innovation. This includes small-scale manufacturing but also relatively advanced industries such as aerospace and cell-phone manufacturing.

"It takes significant resources for a company to set up a work environment for a robot," says Julie Shah, an assistant professor of aeronautics and astronautics at MIT, who studies the role of robots in manufacturing. "It requires suppliers providing materials in a certain way, it requires designing the whole factory infrastructure, and it requires caging the robot. If you need to reprogram these robots, it often takes special expertise or external consultants."

Some fear that overcoming those obstacles could cost human jobs. But Brooks doesn't agree. He says Baxter is designed to make human workers more efficient, not to replace them. "An electric drill makes a home contractor more productive," he says. "Should we ban electric drills so there are more jobs for home contractors? You ask any home contractor that."

Other experts agree that robots like Baxter could improve U.S. employment prospects in the long term. Willy Shih, a former IBM and Kodak executive who studies the relationship between manufacturing and innovation as a professor of management practice at Harvard Business School, says manufacturing work moved to China partly because it was easier to use humans than to make automation more flexible. Baxter could change that calculation. "To the extent that they can reduce the setup overhead for changing over a line or something, then that becomes really interesting," he says. "Anything that improves flexibility, that's a huge deal."

Boosting the efficiency of small manufacturers could help fuel the economy and drive job creation. By shifting the balance away from low-cost human labor, Baxter and similar robots could perhaps also make manufacturers in the United States and Europe more competitive with their counterparts in Asia. "If you can develop a robot that's capable of integrating into the human workflow, into the human part of the factory—if it has just a little bit of decision-making ability, a little bit of flexibility—that opens up a new type of manufacturing process, which is what's really exciting to me," says Shah.

Back at Vanguard Plastics, Baxter is viewed as just another tool. "There wasn't any fear, like 'Oh, I'm gonna be fired'—no, it has nothing to do with that," says Budnick. He adds that the company plans to buy its own Baxter if the cost can be worked into the budget for the coming year (the robot will cost $22,000). The plan is to have the robot work alongside a person by feeding freshly molded plastic cups into a bagging machine. "The normal robot would populate the conveyor with stacks of 20 cups, and then Baxter would take the 20 and feed a bagger," Budnick says. "Then all our operator would have to do is take the finished bag and pack them out."

That would be humble beginning for a robot as clever as Baxter. But like any other worker, it will start with jobs its coworkers don't want to do. "I don't know exactly where it's going to go," says Brooks. "But I know it's going to be a revolution."

Will Knight

Online Editor

I’m Technology Review’s online editor. I commission and edit many of the stories that appear on this website. Before joining TR, and moving to the United States, I...
See full bio »

Related Articles:

Meet 2012 TR35 Winner Leila Takayama

Takayama applies the tools of social science to make robots easier to live and work with.

A Robot to Tilt Solar Panels

Startup QBotix uses a robot traveling along a track in solar farm to optimize the angle of light on panels.

Martin LaMonica

Mapou2alinapetersen78dd36torgsyv
Post comment astwitter logofacebook logo
Sort: Newest | Oldest
torgsyv

Decades ago, Walter Reuther, the storied head of the United Auto Workers union, was taken on a tour of an automated factory by a Ford Motor Co. executive. Somewhat gleefully, the Ford honcho told the legendary union leader: "You know, not one of these machines pays dues to the UAW.“

"And not one of them buys new Ford cars, either", replied Walter Reuther.

Mapou

Very interesting but a fellow worker, eh? Isn't this going a little too far? Somehow I doubt that human workers will consider this Baxter robot a pal. An evil competitor? Probably. But a fellow worker? I don't think so. Baxter and his kind are bound to come face to face with our growing rage against the machine.

 

The intelligent robots are coming and everybody will become unemployable. There is no point in hiding our heads in the sand and pretend it's not going to happen. And by everybody, I mean everybody. Not just the factory worker and the gardener. Are the people in power preparing for this eventuality? Does Dr. Brooks even care or dare to look down that road?

apetersen78

 Mapou Wow you are really short-sighted.  If a robot can do the job more efficiently and effectively than a human being, then progress demands it.  Besides, who really wants to work in a factory?  I have and it stinks.

 

Let's put it another way: if robots did everything for us, quality of life would increase dramatically for everyone, goods would become cheap and plentiful and even if the only jobs available were those that robots couldn't do, what would be the harm?

dd36

 apetersen78  Mapou  If robots did everything for us, how would people earn incomes?  Socialism?  Robots will make the rich richer, no doubt.

Mapou

 apetersen78 You don't get it. I love robots and the more intelligent the better. In fact, I want all of humanity to be taken care of by robots. Robot farmers, butchers, chefs, doctors, engineers, lawyers, etc. The problem is not robots. The problem is that millions of intelligent robots that can do everything pose a real problem for the thievery system known as capitalism. And socialism and communism will not do either. They are equally flawed because they are all based on human slavery, uh, I mean labor.

Advertisement
Advertisement

Technology Review Lists

TR35

Our list of the 35 young innovators of 2012. See list »

Saikat Guha

Letting advertisers send targeted pitches to your mobile phone without ever seeing your personal information

Read more »

Explore our TR35 List:

Sponsored Content

Technologies from National Instruments

Make Energy from Fusion
Listen as Stefano Concezzi and Michael Cerna talk about making energy from fusion. Fusion is happening all around us. By 2019, the ITER experimental reactor will attempt to generate 500 megawatts of fusion power from 50 megawatts of power consumed. In order to accurately measure plasma shape and position, critical to the eventual confinement of plasma at 150-million degrees, it takes a specialized real-time and multicore system. To simulate the hardware in the loop is even more difficult. See how NI LabVIEW and NI PXI help prove out this technology.

Stay ahead with the latest trends and technology driving innovation

Register Now

Stay ahead of the competition by attending the National Instruments 2012 Embedded Technology Summit that offers valuable insight into the latest trends and technologies driving innovation in embedded control and monitoring applications. This event includes access to multiple technical sessions where you can learn how to overcome some of the biggest challenges in energy, power quality, condition monitoring, transportation, and machine control.

Register Now >

Find us on Youtube
Advertisement

View from the Marketplace

Close X

Since 1976, National Instruments has equipped engineers and scientists with tools that accelerate productivity, innovation and discovery.

http://www.ni.com

Advertisement